GB 50551-2010 球团机械设备安装工程质量验收规范
作者:标准资料网 时间:2024-05-15 18:05:15 浏览:8037
来源:标准资料网
基本信息
标准名称: | 球团机械设备安装工程质量验收规范 |
英文名称: | Code for quality acceptance of palletizing mechanical equipment installation engineering |
发布部门: | 中华人民共和国住房和城乡建设部 |
发布日期: | 2010-05-31 |
实施日期: | 2010-12-01 |
首发日期: | |
作废日期: | |
起草单位: | 中国十七冶集团有限公司;中冶华天工程技术有限公司;中冶天工上海十三冶建设有限公司 |
出版社: | 中国计划出版社 |
出版日期: | 2010-12-01 |
书号: | 1580177.447 |
适用范围
本规范适用于新建和改、扩建球团机械设备安装工程的质量验收。
前言
没有内容
目录
1 总则
2 术语
3 基本规定
4 设备基础、地脚螺栓和垫板
5 设备和材料进场
6 混合与造球设备安装工程
7 布料设备安装工程
8 竖炉设备安装工程
9 带式焙烧机设备安装工程
10 链箅机—回转窑设备安装工程
11 环式冷却机设备安装工程
12 球团机械设备试运转
引用标准
没有内容
所属分类:
【英文标准名称】:Greencoffee.Determinationofmoisturecontent(routinemethod).
【原文标准名称】:生咖啡.水分测定(常规法)
【标准号】:NFV03-311-1987
【标准状态】:作废
【国别】:法国
【发布日期】:1987-12-01
【实施或试行日期】:1987-12-20
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:含量测定;水;农产品;化学分析;化学分析和试验;咖啡
【英文主题词】:Agriculturalproducts;Coffee;Determinationofcontent;Routinetests;Water
【摘要】:
【中国标准分类号】:B35
【国际标准分类号】:67_140_20
【页数】:2P;A4
【正文语种】:其他
【英文标准名称】:StandardSpecificationforUncoatedStress-RelievedSteelWireforPrestressedConcrete
【原文标准名称】:预应力混凝土用未涂覆的应力消除钢丝的标准规格
【标准号】:ASTMA421/A421M-2010
【标准状态】:现行
【国别】:
【发布日期】:2010
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.05
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:冷拉制线材;低弛豫线材;预应力混凝土;钢丝(钢筋束);应力放松钢线;混凝土配筋.规格;钢丝(预应力钢筋混凝土);冷拉钢丝.规格;裸露钢制品
【英文主题词】:cold-drawnwire;low-relaxationwire;prestressedconcrete;steelwire(tendon);stress-relievedwire;Concretereinforcement--specifications;Steelwire(prestressedconcrete);Cold-drawnsteelwire--specifications;Uncoatedsteel
【摘要】:1.1Thisspecificationcoverstwotypesofuncoatedstress-relievedroundhigh-carbonsteelwirecommonlyusedinprestressedlinearconcreteconstruction,asfollows:1.1.1TypeBAwireisusedforapplicationsinwhichcold-enddeformationisusedforanchoringpurposes(ButtonAnchorage),and1.1.2TypeWAwireisusedforapplicationinwhichtheendsareanchoredbywedges,andnocold-enddeformationofthewireisinvolved(WedgeAnchorage).1.2Asupplementaryrequirement(S1)isprovidedforusewherelow-relaxationwireandrelaxationtestingforthatproductisrequiredbythepurchaser.Thesupplementaryrequirementappliesonlywhenspecifiedinthepurchaseorder.1.3Thisspecificationisapplicableforordersineitherinch-poundsunits(asSpecificationA421)orinSIunits(asSpecificationA421M).1.4Thevaluesstatedineitherinch-poundorSIunitsaretoberegardedseparatelyasstandard.Withinthetext,theSIunitsareshowninbrackets.Thevaluesstatedineachsystemmaynotbeexactequivalents;therefore,eachsystemshallbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnon-conformancewiththestandard.
【中国标准分类号】:H49
【国际标准分类号】:77_140_65
【页数】:4P.;A4
【正文语种】: