您的位置: 标准下载 » 国际标准 » BS 英国标准 »

BS EN ISO 11137-2-2012 保健产品的灭菌.辐射.确定杀菌剂量

作者:标准资料网 时间:2024-05-14 20:35:21  浏览:9801   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:SterilizationofhealthcareProducts.Radiation.Establishingthesterilizationdose
【原文标准名称】:保健产品的灭菌.辐射.确定杀菌剂量
【标准号】:BSENISO11137-2-2012
【标准状态】:现行
【国别】:英国
【发布日期】:2012-06-30
【实施或试行日期】:2012-06-30
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:验收(鉴定);生物危害;校正;检验;清洁;容器;定义(术语);剂量;剂量计;剂量测定;效率;选举;电子束;评定;γ辐射;杀菌剂;指导手册;保健;卫生学;检查;电离辐射;辐照器;射流;维修;医疗器械;医疗器材;医疗产品;医学科学;医疗技术学;方法;性能;全体人员;光线疗法;车间;产品信息;公共卫生;公共卫生防护;合格;质量管理;辐射;辐射剂量;射线处理;常规试验;规范(验收);辐射灭菌;灭菌;监督(认可);有校性;验证;X射线
【英文主题词】:Acceptance(approval);Biologicalhazards;Calibration;Checks;Clearing;Containers;Definitions;Dose;Dosimeters;Dosimetry;Efficiency;Elections;Electronbeams;Evaluations;Gamma-radiation;Germicides;Guidebooks;Healthprotection;Hygiene;Inspection;Ionizingradiation;Irradiationapparatus;Jets;Maintenance;Medicaldevices;Medicalequipment;Medicalproducts;Medicalsciences;Medicaltechnology;Methods;Performance;Personnel;Phototherapy;Plant;Productinformation;Publichealth;Publichealthprotection;Qualifications;Qualitymanagement;Radiation;Radiationdose;Raytreatment;Routinetests;Specification(approval);Sterilizationbyirradiation;Sterilization(hygiene);Surveillance(approval);Validation;Verification;X-rays
【摘要】:
【中国标准分类号】:C47
【国际标准分类号】:11_080_99
【页数】:84P;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:钢丝绳用楔形接头
英文名称:Cuneiform connector for use with steel wire ropes
中标分类: 机械 >> 通用机械与设备 >> 起重机械
ICS分类:
替代情况:替代GB/T 5973-1986
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2006-04-03
实施日期:2006-09-01
首发日期:1986-04-03
作废日期:1900-01-01
主管部门:中国机械工业联合会
提出单位:中国机械工业联合会
归口单位: 全国起重机械标准化技术委员会
起草单位:大连大起集团有限责任公司
起草人:丁志强、刘大强
出版社:中国标准出版社
出版日期:2006-09-01
页数:平装16开, 页数:9, 字数:12千字
计划单号:20010926-T-604
适用范围

本标准规定了钢丝绳用楔形接头的型式和尺寸、技术要求、试验方法、检验规则、标志、包装、运输和储存。本标准适用于各类起重机上的,符合GB 8918—2006、GB/T 20118—2006规定的绳端固定或连接的圆股钢丝绳用楔形接头。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 通用机械与设备 起重机械
Product Code:SAE J1939
Title:Recommended Practice for Truck and Bus Control and Communications Network
Issuing Committee:Truck Bus Control And Communications Network Committee
Scope:These Recommended Practices are intended for light, medium, and heavy duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g. generator sets). Vehicles of interest include, but are not limited to: on and off highway trucks and their trailers; construction equipment; and agricultural equipment and implements.The purpose of these Recommended Practices is to provide an open interconnect system for electronic systems. It is the intention of these Recommended Practices to allow Electronic Control Units to communicate with each other by providing a standard architecture.