HG/T 2054-2007 搪玻璃设备 卡子
作者:标准资料网 时间:2024-05-17 19:09:45 浏览:8869
来源:标准资料网
基本信息
标准名称: | 搪玻璃设备 卡子 |
英文名称: | Clamps for glass lined vessels |
中标分类: |
化工 >>
化工机械与设备 >>
非金属化工机械设备 |
ICS分类: |
|
替代情况: | 替代HG/T 2054-1991 |
发布部门: | 中华人民共和国国家发展和改革委员会 |
发布日期: | 2007-09-22 |
实施日期: | 2008-04-01 |
首发日期: | |
作废日期: | |
提出单位: | 中国石油和化学工业协会 |
归口单位: | 全国搪玻璃设备标委会 |
起草单位: | 北京华腾大搪设备有限公司 |
起草人: | 张延经、金生、李小红、何晋民 |
出版社: | 化工出版社 |
出版日期: | 2008-04-01 |
页数: | 7页 |
适用范围
本标准规定了搪玻璃设备用卡子的型式、基本参数、主要尺寸及技术要求。
本标准适用于搪玻璃设备用A、B型卡子。
A型卡子适用于设计温度高于-20℃~200℃,设计压力小于等于1.0 MPa的搪玻璃设备,当材料选用35钢时,适用于设计压力为小于或等于0.6 MPa的搪玻璃设备;B型卡子适用于设计温度-10~C 1200℃,设计压力小于等于0.25 MPa的搪玻璃设备。
前言
没有内容
目录
没有内容
引用标准
GBXT 97.1 平垫圈 A级
GB/T 699 优质碳素结构钢
GB/T 2828.1 计数抽样检验程序第1部分:按接收质量限(AQ1)检索的逐批检验抽样计划
GB/T 3077 合金结构钢
GB/IT 5784 六角头螺栓细杆B级
GB/T 6170 1型六角螺母
GB/T 9440 可锻铸铁件
JB/T 4385.1 锤上自由锻件通用技术条件
JB/T 4730.4 承压设备无损检测第4部分:磁粉检测
所属分类: 化工 化工机械与设备 非金属化工机械设备
【英文标准名称】:Rubber,rawnaturalandrawsynthetic-Samplingandfurtherpreparativeprocedures
【原文标准名称】:天然和合成生橡胶.取样和样品制备规程
【标准号】:BSISO1795-2007
【标准状态】:现行
【国别】:英国
【发布日期】:2007-06-29
【实施或试行日期】:2007-06-29
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:化学分析和试验;定义;穆尼单位;天然橡胶;物理测试;生橡胶;橡胶;试样制备;抽样方法;合成橡胶;测试;粘度;硫化橡胶
【英文主题词】:Chemicalanalysisandtesting;Definitions;Mooney;Naturalrubber;Physicaltesting;Rawrubber;Rubber;Samplepreparation;Samplingmethods;Syntheticrubber;Testing;Viscosity;Vulcanizedrubber
【摘要】:ThisInternationalStandardspecifiesamethodforthesamplingofrawrubberinbales,blocksorpackagesandfurtherprocedurescarriedoutonthesamplestopreparetestsamplesforchemicalandphysicaltests.
【中国标准分类号】:G34
【国际标准分类号】:83_040_10
【页数】:12P.;A4
【正文语种】:英语
Product Code:SAE AMS4324
Title:Aluminum Alloy, Extruded Rod, Bar and Profiles (7055-T74511), 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr, Solution Heat Treated, Stress-Relieved, and Overaged
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope:This specification covers an aluminum alloy in the form of extruded bars, rods, and profiles (shapes) produced with a cross sectional area of 24 square inches (155 cm虏) maximum and a circumscribing circle diameter (circle size) of 10.5 inches (267 mm) maximum. See 8.3 for a definition of circumscribing circle diameter.